I'm  running a temp gauge and sender from an 87 Audi 5000, the sender
mounts in the oil  pressure port on the bottom side of my type IV Engine.
I've also tried the sump plate sender and get about the same temps.
I run an oil cooler inside of engine compartment. PIC
http://williamwareagency.com/forsale/stanvan/83cooler1.jpg

Stan Wilder

On Sun, 23 Dec 2001 22:43:47 -0500 Dennis Haynes <dhaynes@OPTONLINE.NET>
writes:
> Where is your Temp gauge sensor mounted? If this is an actual oil
> temperature, be happy. You engine is running well and your are not
> pushing it too hard. If your sensor is mounted on a tee with the
> oil
> pressure switch or gauge, you are not getting an accurate reading.
>
> Dennis
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
> Behalf
> Of Greg Marshall
> Sent: Sunday, December 23, 2001 5:54 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Another operating temp question
>
> What should the operating oil temperature of my aircooled engine be?
>  On
> the
> highway, mines's running about 80 celsius.  That's abour 175
> fahrenheit.
>
> Seems low to me, but i'm not sure..
>
> Thanks,
>
> Greg.
> 82 westy
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.