Gary, I just installed senders and gauges for oil temp and oil pressure
last week. I used VDO and was able to use their "standard" aftermarket
senders. Here's the big bonus... look at the oil filter mount on the TiiCo
motor. There is the place where the oil dummy light switch is screwed in,
and there are also two other allen head screws on that mount plate. Unscrew
them and you can screw the VDO senders right into them. The temp sender is
longer and goes in the hole closer to the firewall, and the pressure sender
goes in the other hole. My senders had tapered threads, so they wouldn't
screw in all the way, but the pitch is correct for the holes. Very nice!

Sean B.
'90 V'gon, "Happy Bus", pseudo Wolfy
Torrance, CA
Join the TiiCo registry at
HTTP://www.vgonman.com