Craig;
        If the flywheel and crank were both originally balanced together
and you did not retain the original orientation, the resulting imbalance
_could_ reduce bearing life. I'm talking worse case scenario. It probably
is OK but I would not do it intentionally.

Good Luck and Drive Safely
Ken Lewis
86 Crewcab,60 356
http://Neksiwel.20m.com/

On Mon, 31 Dec 2001 17:42:54 -0800 Craig Jones <jimcricket@W-LINK.NET>
writes:
> Have I made a grave mistake? I forgot to install the pin between
> flywheel
> and crankshaft on my T4. What are the consequences? Thanks, craig
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.