

| Subject: | Re: Leveling shims. Success report and mistakes to avoid. |
| From: | developtrust |
| Date: | Fri, 11 Jan 2002 17:22:42 -0800 |
After re-inflating my Air Lift balloons in the rear springs I discovered that the left rear shim fix did NOT correct the front sway completely. My front still sways 3/4 inch to the left, but I suppose 1/4 inch correction is still good. Although I want to raise the front one inch (and correct that 3/4 inch sway) I'm going to defer that project due to the fact that the front end is a lot more work. I've decided against the spring spacers you buy at FLAPS as I am concerned that alignment might suffer such a lop sided approach. I'll put in the Teflon and rubber shims up front when the time comes. William Polowniak 1989 Vanagon GL 1988 Mercedes 300 SE
Have something to add on this topic today? Revive this thread in the forum »