Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Leveling shims. Success report and mistakes to avoid.
From:Stan Wilder
Date:Fri, 11 Jan 2002 19:54:10 -0600

I've never had anyone ask about the slight lean I have on my Westy and
the thougt of loading one side with spacers to get it up 3/4" hasn't
excited me.
I quote from one of my recent posts " I considered swaping my springs
left to right to correct the lean and then I ran out of Beer".

Stan Wilder
83 Air Cooled Westfalia

On Fri, 11 Jan 2002 20:09:50 EST Frank Grunthaner <FrankGRUN@AOL.COM>
writes:
> Sorry, must chime in here. The use of Teflon spacers or shims in
> this
> application is a very bad idea. Bulk Teflon flows in response to
> long term
> static pressure. These shims will relax and change thickness over
> time. The
> effect would be particularly strong if the spring directly contacts
> the
> Teflon. I have readily moved 1/2 inch bar stock, 1/2 inch into 3/4
> inch thick
> bulk Teflon.
>
> Frank Grunthaner
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.