

| Subject: | Re: Using Gunk or other engine cleaning solvents! |
| From: | Angus Gordon |
| Date: | Fri, 11 Jan 2002 22:52:36 -0500 |
I would certainly agree with Dennis regarding being cautious of running solvents through the engine. That said, and since it's Friday, here's my solvent story... Years ago, I decided to park a fully bio-degraded Bug. I had been thinking about the structural integrity (or lack thereof) for a while, so when the gas heater burned itself up one cold Ontario winter I figured this was a good time to end our relationship. Trouble was it had a great engine, strong, tight, good compression. So I pulled the engine and gave it to a friend, Dave, to keep as a spare for his Beetle. Well Dave didn't bother to preserve it, as I'd suggested. Instead he just stuck it under his front porch, and waited for his current engine to cave in - which wound up taking five years before it finally threw a connecting rod. Dave hauled my engine out from under the porch, and we took it and the car over to my shop to see what we could do. The engine was a block of rust. It was seized solid from the years of neglect. We couldn't turn it over, even with a crow bar on the flywheel. So out came the plugs, and in went every kind of solvent we could lay our hands on. We filled the cylinders and crankcase with a mixture of WD-40, Liquid Wrench, ATF, MM oil, varsol, diesel fuel, and anything else that was laying around. Then we let it soak overnight. The next day, with a bigger crow bar, we could just barely move the flywheel about an inch. So we levered it back and forth, a fraction more each time, until we could finally turn the engine over, though it took a lot of force. Next we bolted the engine into the car, hooked up a chain, and leaving the plugs out, towed it around in gear for a while. When it felt loose enough, we drained it, put in oil and plugs and turned the key. Fired right up, like it had been shut down yesterday! The only problems we had cropped up about a week later when a couple of valve springs broke, right where they had corrosion on them. We swapped springs from the trashed engine, and he drove that engine for another five years before selling the car! Gotta love those old VW's Angus Angus Gordon NW Ohio '86 Syncro '89 Carat
Have something to add on this topic today? Revive this thread in the forum »