At 03:30 PM 1/12/02 -0800, Todd Last wrote:
>It also looks at things such as the power steering pressure switch.
>If you look at the wiring diagram on page 97.138 (Air Conditioning)
>You  will see the A/C compressor cut-out relay is wired to the Idle stabilizer
>valve.

Yes, but it is important to keep terminology and model years straight when
discussing this. Pre-'86, there is no Idle Stabilizer *Valve*, only the
electronic Idle Stabilizer connected to the distributor circuitry. The
former may connect as you described on '86 and later models, but the latter
on the '83-'85 models does not.

Regards,
John Clavin