

| Subject: | Re: Horn don't toot |
| From: | David Beierl |
| Date: | Mon, 14 Jan 2002 17:26:54 -0500 |
At 05:14 PM 1/14/2002, Donald Welch wrote: >Tested the horn and it works. Traced the hot wire back to a relay and >thought ah-ha the horn relay is bad. Only to find out (via Bus Depot >call) that there is no horn relay. > >I unwraped the tape from around this relay where the power appears to come >from got the number and it seems this is a fuel pump relay. > >Question... could this be the problem even though the fuel system seems fine? I suspect you may have mis-traced the wire. Per 97.214, track 130, wiring is Fuse S16 to pin C13 on fuse panel plugs, 1.0 Bk/Y to horn, 1.0 Br/Bl back to panel pin C15, internal jumper to pin B25, 1.0 Br/Bl to steering column switch, 1.0 Br to ground. With horn button not pressed, should see 12v all the way from fuse to horn button. With button pressed, approaching 12v from fuse to horn, close to ground from horn to horn button to steering-column ground. david >Thank you.. Don Welch >91 Nobadays -- David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation"
Have something to add on this topic today? Revive this thread in the forum »