The hooks will bend but be sure it is warm and go slow. Use a hair dryer to
warm things up or do it after you ride for a while with the heaters on full
blast. Simple design.

William
----- Original Message -----
From: "earl smith" <comox54@HOTMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, February 03, 2002 7:27 PM
Subject: removing glove box on 86

> I want to remove the glove box on my "new" 86 in order to check some
wiring.
>   On my 84, the glove box was secured with a plastic cord to keep it from
> falling open.  This glove box has a heavy plastic hook glued on each side.
> I can't figure out how to take it out without removing the whole dash.  Of
> course there is nothing in Bently about this.  I tried bending the hooks
> inward to slip them under the stops but they are too stiff.
>
> Please reply to rover@inetex.com
>
> TIA  Earl
>
>
>
>
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx