Joseph,

Check that the connector on the end of the wire is the same as the connector on
the coil. There are two kinds: The old plain style & the newer kind which has a
stud sticking up in the middle, inside where the wire goes into. Most likely
you have old style wires & distributor cap, and new style coil.
Unless you want to get into replacing the connector at the end of the coil-
wire, make sure that the wire-set & the distributor cap match whatever kind of
coil you have.

Erik V.

Citerat fr�n Joseph Fortino <fortino1@ONEBOX.COM>:

> Seems this weekend I found my " new " plug wires took a dive.
> well my coil wire is just way loose at the coil end. nothing
> will get it tight/snug
>
>
>
> --
> Joseph  Fortino
> fortino1@onebox.com - email
>
>
>
>
> __________________________________________________
> FREE voicemail, email, and fax...all in one place.
> Sign Up Now! http://www.onebox.com
>

................................................................
   SVERIGES ENKLASTE E-POSTADRESS! - http://www.sverige.nu
   SVERIGES NYA ADRESSREGISTER! - http://www.adress.nu