Earl-

Bending them in is just the ticket.  If it is cold, I would suggest first
heating them with handheld blow drier.  I've taken mine out several times
and it makes me nervous too.

1987 Vanagon GL

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
Of earl smith
Sent: Sunday, February 03, 2002 10:28 PM
To: vanagon@GERRY.VANAGON.COM
Subject: removing glove box on 86

I want to remove the glove box on my "new" 86 in order to check some wiring.
  On my 84, the glove box was secured with a plastic cord to keep it from
falling open.  This glove box has a heavy plastic hook glued on each side.
I can't figure out how to take it out without removing the whole dash.  Of
course there is nothing in Bently about this.  I tried bending the hooks
inward to slip them under the stops but they are too stiff.

Please reply to rover@inetex.com

TIA  Earl

_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx