

| Subject: | Re: '91 Westy Coolant |
| From: | Ben McCafferty |
| Date: | Sat, 9 Feb 2002 03:05:02 -0800 |
Well, if you ever think a helicopter is landing on your van, you'll know you've hit the second stage of that switch.... :) bmc :) "Faith will move mountains, but you'd better bring a shovel...." > From: Chuck Mathis <CMathis227@AOL.COM> > Reply-To: CMathis227@AOL.COM > Date: Fri, 8 Feb 2002 16:47:49 EST > To: vanagon@GERRY.VANAGON.COM > Subject: Re: '91 Westy Coolant > > Check Ken Wilford's site (vanagain.com) for a trouble shooting procedure for > the fan switch. The fan in my '85 comes on so seldom that it usually > startles me. A couple years ago I was stuck in Rod Run traffic in Pidgeon > Forge and the fan kept kicking in. Checking my Digitool I noticed that the > fan kicked in when the Temp II reading hit .5 and shut off when it went to > .7. Since I replaced the coolant, water pump and thermostat (routine > maintenance no problems) it doesn't get to the LED except when I'm stuck in > traffic for a long, long time. > > Chuck > '85 Wolfsburg Westy - 'Roland the Road Buffalo' > > In a message dated 2/8/2002 3:02:10 PM Central Standard Time, > LISTSERV@GERRY.VANAGON.COM writes: > > >> Date: Fri, 8 Feb 2002 11:24:30 -0700 >> From: Bob Stevens <mtbiker62@HOTMAIL.COM> >> Subject: '91 Westy Coolant >> >> OK...thanks for the aid given. I've tightened the clamps connecting the >> rubber hoses to the plastic lines. That stopped the leak. Went through the >> refilling/bleeding ritual and let it run until temp gauge went above LED, >> and the fan never came on. Soooo, this sounds like the next step is the >> thermoswitch, no? Any advice will be appreciated ;>) >> Bob Stevens >> '91 Westy >
Have something to add on this topic today? Revive this thread in the forum »