>The other day my wife and I went to Home Depot to pick up some
>mouldings and we needed to roll down the passenger side window.
>Now it won't go back up. I pulled off both passsenger and driver side
>panels
>to see if there is a disconnected wire, but everything seems OK.
>
>When I click the button to go up, nothing happens.
>When I click the button to go down, I hear a clicking noise.
>
>Is there any way I can get the window to go up, so I can take the car to
>the train
>station? Also, any suggestions on how to troul\bleshoot the window?

tim, i had this same problem.  turned out my regulator was frozen.  i had
to remove the regulator and motor from the door, crack the regulator case,
and soak/tap/repeat until i could get the worm gear that drives the cable
cog free from the lower of the two bushings that hold it in place.  then
emery paper both parts, grease like hell and button it all up.  then back
in the window.  i had to work it over again (major pita!), and finally it
works, but not as before.  hence i have just gotten a good used one for
each side...

you might also try contact cleaner on your switch...

best of luck!
bill