Remove the door panel, place a piece of wood (like a 1x2 or 1x3) under
the window riser.
This will hold the window up.

Unplug the wires that go to the motor. Hook a multimeter up to the wires
and see if you are getting power to the motor.
Run power to the motor itself and see it works. This should at least
pinpoint where the problem is.

Another thing to try is to unplug one then the other switch and see if
disconnecting one of the switched fixes the problem. If it does you have
a bad switch.

Todd
'88 Westy

tim wrote:

>The other day my wife and I went to Home Depot to pick up some
>moldings and we needed to roll down the passenger side window.
>Now it won't go back up. I pulled off both passsenger and driver side
>panels
>to see if there is a disconnected wire, but everything seems OK.
>
>When I click the button to go up, nothing happens.
>When I click the button to go down, I hear a clicking noise.
>
>Is there any way I can get the window to go up, so I can take the car to
>the train
>station? Also, any suggestions on how to troul\bleshoot the window?
>
>Thanks
>