In a message dated 2/27/02 2:13:45 AM EST,
andrew.grebneff@STONEBOW.OTAGO.AC.NZ writes:

<<  It would bolt straight to the
 VW trans, >>

This is incorrect. I have seen a removed Boxster engine. The bellhousing bolt
pattern is entirely different. It uses 8 bolts to mount to the trans. Biggest
problem is the reference and speed sensors for the Motronic. Adapter would
not be that hard to make but the flywheel with its cutter rings would be VERY
expensive.

John Wessels
European Motorsport
Livermore, CA 94550
http://www.euromog.com