Now the biggest trick is getting replacement heat shielding for the lines.
I've been searching for this stuff for months to no avail.

-Don

----- Original Message -----
From: <KENWILFY@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, February 27, 2002 7:58 AM
Subject: Re: Fuel Injection Hose-----what size ID.....7mm?

> Yes, but why not just buy this in a kit form from me.  The kit includes
10ft
> of German 7mm hose, 20 stainless hose clamps and an instruction sheet on
how
> to do this.  It is $53.  I would recommend getting rid of that plastic
piece
> that comes through the firewall as it is a fire hazard and doesn't do
> anything (the line goes through the firewall on the return side without a
> similar piece).  Just put a piece of rubber bumper around the hose to keep
it
> from chafing and you will be fine.  Let me know if I can help you.
>
> Thanks,
> Ken Wilford
> John 3:16
> http://www.vanagain.com
> Phone: (856)-327-4936
> Fax: (856)-327-2242
>