>However, I have not found all the relationships between the old and the
>new connectors. The closest thing I've found in the archives is a table
>with the old and new 14-multi point connectors between an air-cooled and
>an 85+.

>I will take my time and review the Bentley, but it would be very useful
>if someone could share with me the details, and any problem that is
>likely to arise.

There are only two wiring harnesses, 80-84, and 85 on up, so if you have
the Bentley, you will be able to clearly see the differences between your
original and the one you wish to install. They are quite different IIRC.
Some folks have said that the tach wire is already run in some vanagons,
so check around for that before you run anymore wires.

I have the drawings showing the differences in the harnesses, but they
came right out of the Bentley, so if you have that, you should be home
free.

The connector plug comes apart quite easily so you can switch all the
wires without having to cut and splice them.

If you need more help, give a shout

Regards,

John