Wrong again---

I have several differet varieties of sand blaster's, and if it ain't 90
degree's I don't mind using them---

The one that I would recomend for the seams is sold by Snappy--and has
several different sized tips on the end of it to direct the abrasive
material right on the area in question--lile a pencil tip on the
seam--works real good, not real messy, and it's a hand held devise,
silica sand and all.

Later,

Terry

E-mail message From Robert�Steven�Fish.

There is no other way to do this procedure. But since none of us owns
one, or wants to use one, then it will always be done incorrectly.
RSF
<�)))>{���<�)))>{���<�)))>{���<�)))>{���<�)))>
Robert S. Fish
Salzburg, Austria
1987 Wolfsburg Vanagon 2.1 GL Weekender
1987 Golf Cabriolet
1991 Golf
----- Original Message -----
From: "Hector Zapata" <hector.zapata@XRXGSN.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, March 07, 2002 2:51 AM
Subject: Re: Cleaning body seams
I use a toothbrush, old one, of course.
Hector
----- Original Message -----
From: "Todd Last" <
Does anyone have any tricks for cleaning the seams between the body
panels? Just using a washrag is not working.
Todd
'88 Westy