As I recall, there is one set of screws that holds the vent to the body, and
another pair of screws that hold the vent tubes to the flange. Depending on
what you are trying to do, you may need to remove both (if you want to pull
the fridge out away from the wall with the vent tube attached)

FYI if you pull the fridge, be VERY CAREFUL not to bend or distort those
vent tubes, and you will save yourself a lot of grief putting it back in.
(Otherwise they don't line up and you end up needing a helper to fish around
from the outside of the van)

For information on reviving your Dometic, check out the articles at
http://www.vanagon.com/info/articles/#Refrigerator_Info

Brent Christensen
'89 GL Syncro Westy
Santa Barbara, CA

>
>I wanted to pull the vent cover today but was immediately challenged:  mine
>has the three screws shown in Bentley, but it also has two more at six and
>twelve o'clock.  I didn't want to rush in and find that removing the two
>additional screws might allow something to disappear into the body cavity.
>I would appreciate any info from the list.  What I'm trying to do is to
>vacuum out the exhaust tube to see if that might bring the Dometic back to
>life.

_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com