At 07:33 PM 3/15/2002, Rico Dagastino wrote:
>ignition module, which is connected to the ECU by a white wire, trigger the
>injectors by sending an electrical charge from the Ignition Module to the
>ECU, or is the firing of the injectors triggered by the ignition module
>grounding the triggering circuit in the ECU?  Knowing the answer to this
>question would allow me to more easily find the faulty component.

See if you have constant +12v to the injectors.  The ECU fires them by
grounding them.  It uses the wire from the ignition module for tacho and
timing information -- among other things the fuel pump won't run if
ignition pulses aren't detected.

I don't know the exact nature of the signal from ign module to ECU, but
it's a timing, not a power signal.  I wouldn't be surprised if it was
either 5v or 12v pulsed, very likely with a nice clean pulse derived from
the Hall sensor -- might even be a straight pass-through.

david

--
David Beierl - Providence, RI
  http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"