Jack,

Make sure you have a good ground wire for the green coax O2 sensor.

The green O2 coax wire has an outer sheath (its coax) and this outer
sheath goes back to the ECU and comes out as a brown ground wire.
This ground wire attaches directly to the engine.  It is critical that
this is properly grounded otherwise the ECU will get false readings
from the 02 sensor and cause lean or too rich situations (usually too
rich).

On my 90 Westy this ground wire is all brown.  The Bentley wire
diagrams will tell you your color.  Probably brown/red or brown/black.

I had the same problems as you until I fixed this ground wire.

Laurence Smith
Hamilton, ON
90 Westy (fanumbos)

> -----Original Message-----
> From: Vanagon Mailing List
> [mailto:vanagon@gerry.vanagon.com]On Behalf
> Of Jack Pronovost
> Sent: Monday, March 18, 2002 4:20 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Stranded in Texas
>
>
> Hello Volks
>     Need an ECU (on board computer) for a 2.1L 1986
> Vanagon. Replaced all sensors, injectors and more, one at
> the time and the problem persists, either flooding or too
> lean and sometimes runs OK for a short while, the ECU is
> getting more and more suspect as I go. The Bus Depot has
> none except on special order but with uncertain delivery.
> Need to leave Texas soon, any help out there.  Thanks Texas Jack
>