>Jack,I've never had to remove the trans too. sounds like too much work to
>me.

Correct...

Unbolt the 4 bolts holding the engine transmission together. Have support
blocks about 4 inches under the front of the transmission, have a floor jack
under the engine. Disconnect the engine mounts on the outboard side and
lower the engine. It will basicly slide off the input shaft of the
transmission. Lower engine and  pull out on floor jack.
Sounds easy, is easy.

Follow the Bentley.

tim in san jose

_________________________________________________________________
Join the world�s largest e-mail service with MSN Hotmail.
http://www.hotmail.com