I used the Dansk heat exchangers on both my 1976's ( one set supplied by
VW during that wonderful and mysterious free "heat exchanger evaluation"
thing about 5 years ago).

Anyway... they worked great, and I have no qualms about the quality,
which appeared at least as good as the originals.=

Developing business and guiding change since 1996,

G. Matthew Bulley
Bulley-Hewlett
Corporate Communications
Business: www.bulley-hewlett.com
Alliance: www.ntara.com
Call tollfree: +1.877.658.1278

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
Of 80 Westy Pokey
Sent: Tuesday, March 19, 2002 8:10 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Not all Vanagon Heat Exchangers are created equal

I've noticed that my heat exchangers haved rusted through and
its time for new ones. I have heard that NOS is better than
the Danish OEM is this true? Anyone experimented with high
temperature coatings on these? If I buy rust free used ones
is there anything I should watch for? I am running air cooled
federal setup with no cat (stock in Canada) 071-256-091B &
071-256-092B.

Thanks,
Chris