Could it be the upper or lower A-arm bushings?
I believe that if the upper bushings were bad it would effect the camber.
Also, I believe there are different sized camber eccentric washers. You
might want to check with the dealer about that.

Todd
'88 Westy

Steve Cotsford wrote:

>In having an alignment job done today, on my '84 Vanagon Westy, the technician told me that there was insufficient adjustment on my passenger side wheel.
>
>There was about 2 degrees of negative camber and he was only able to reduce it to 1 degree before the adjuster reached its max.
>The other side he was able to set correctly to 0 degrees.
>He also said there was no play in the ball joints and the entire front end is tight still.   Vehicle only has 78 K miles.
>Does anybody have an idea how to correct this situation ?
>
>Thanks,   Steve Cotsford
>