In a message dated 4/23/02 11:15:18 PM, buffy-philip1@COX.NET writes:

<< It will not fit behind the motor mount bar (it falls ~3" short of
the head) and it will not fit in front of the motor mount (the pipe
needs to be in the same physical location as the motor mount bar on the
drivers side).

Cant believe this will not bolt up.It came out ok.its almost like the
installation is different than when I pulled, but I bolted it up and the
tranny is mated to the motor. >>

buffy,

Which way are the arrows on the motor mounting bar ends pointing?  You did
check them, didn't you?

Rich