Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: starter wiring
From:Larry Alofs
Date:Sun, 28 Apr 2002 11:39:51 -0500

Craig Oda - Personal email wrote:
>
> My 1983.5 Westy sometimes has problems starting.  When I turn the key
> nothing happens.  However, if I do it enough, it always starts (so far).  I
> have checked the connections of the battery and the starter and the
> wires are nice and tight.  I figure either the battery is low or the
> starter is going bad.  Or, it could be the switch that controls
> whether I'm in park or neutral on my automatic transmission.
>
> Since I'm still driving the Westy, sometimes to distant places (or
> course ;)   I was wondering how to cross the wires on the solenoid to
> try and start the motor if I wanted to.
>

Anything that make a connection between the large (+) cable on the
solenoid to the spade connector should activate the solenoid and
starter.
  You might consider a relay to do this, activating it with the wire
which normally goes to the push-on spade terminal on the solenoid.  I
believe that BD sells a "hard start relay" kit.

Larry A.
3 previous vans with relays installed.

Have something to add on this topic today? Revive this thread in the forum »