Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Need 84 Westfalia Sink Drain Part
From:Brent Christensen
Date:Mon, 29 Apr 2002 14:52:35 -0700

Ron, does your unit include a *stainless steel* drain replacement that will
fit flush with the sink bottom in a late-model Westy?  The after market kits
that I have tried all include chromed plastic drains and strainers; they are
junk, and do not fit flush with the bottom of the sink.  (As a result, the
sink will not empty completely, and you always have this collection of crud
that won't wash down...)

I have even tried going to a plumbing contractor's supply house and purchase
the correct size drains in stainless steel, but they do not fit either.
(Now I have quite a collection of these stupid little drains...)

-Brent

----- Original Message -----
From: "The Bus Depot" <vanagon@BUSDEPOT.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, April 29, 2002 2:19 PM
Subject: Re: Need 84 Westfalia Sink Drain Part

> > The P-trap is a pretty standard RV part.  You can usually buy a "kit"
from
> > an RV shop that has the trap, drain cup & strainer, and a hose for about
> > $20
>
>
> Yup. I sell it too. Part number 253 069 183A, $19.95;  including the
p-trap,
> hose, drain cap, and floor fitting.  I list this as fitting approx.
'86-91,
> as the earlier Westies were a bit different. It's been a while since I had
> an early 80's model so I can't recall the exact difference.  I would think
> that you could easily fit this to an earlier one, too, though, since the
> sink is the same, although I cannot say that I've tried it myself.
>
> - Ron Salmon
>   The Bus Depot, Inc.
>   (215) 234-VWVW
>   www.busdepot.com
>
> _____________________________________________
> Toll-Free for Orders by Part #    1-866-BUS-DEPOT
>