Phil,

You are right on the tube.  I couldn't find the right size to fit in the
hole in the body.  Look at the centerlines on the tube that inserts into the
body.  That is where I drilled 1/2" bolts through the body and bumper.
There is a bolt with a nut that goes through each of the holes.  When I did
it I had to rent a 1/2" right angle drill to get into the tight area.

-Blake

----- Original Message -----
From: "phil stanhope" <napszeerf@yahoo.com>
To: "Blake Heinlein" <blakeheinlein@hotmail.com>
Sent: Monday, April 29, 2002 3:42 PM
Subject: Re: Bumper Design & Pictures

> Thanks Blake, you just saved some potential
> listmembers $200 or so. The angle iron welded to make
> a tube is becouse you could not find the right size
> box tubing no??
> How does it mount to the frame-members?
>
> Thanks
>
> Phil
>
> --- Blake Heinlein <blakeheinlein@hotmail.com> wrote:
> > To those who wanted details about the bumper I
> > built, here they are.  The PDF is the actual design
> > and the pictures give a pretty good overview of how
> > it goes together.
> >
> > If your making one, my measurements aren't real
> > accurate so measure for yourself!
> >
> > Design:
> >
> http://members.accessbee.com/heinlein/bumperdesign.pdf
> >
> > Pictures:
> > http://members.accessbee.com/heinlein/bumper01.jpg
> > http://members.accessbee.com/heinlein/bumper02.jpg
> > http://members.accessbee.com/heinlein/bumper03.jpg
> > http://members.accessbee.com/heinlein/bumper04.jpg
> > http://members.accessbee.com/heinlein/bumper05.jpg
> > http://members.accessbee.com/heinlein/bumper06.jpg
> > http://members.accessbee.com/heinlein/bumper07.jpg
> > http://members.accessbee.com/heinlein/bumper08.jpg
> >
> > Write if you have any questions.
> >
> > -Blake Heinlein
> > blakeheinlein@hotmail.com
> > http://members.accessbee.com/heinlein/
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Health - your guide to health and wellness
> http://health.yahoo.com
>