Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: A/C Question
From:Dennis Haynes
Date:Mon, 29 Apr 2002 22:36:20 -0400

You need to find out what is setting the radiator fan to run in high
speed. This can either be the coolant temperature in the radiator or a
high pressure switch in the AC system. If the AC is building too much
pressure, the fan will go into high speed and the compressor is turned
off. Does the fan run in low speed whenever the compressor is running?
If not, then you may have a bad fan resistor disabling both low speeds.
Normal operation is as follows:
AC Compressor on, fan at lowest speed.
Radiator cooling first stage, slightly faster.
Radiator cooling second stage, fan full speed, AC Compressor disabled.
AC High pressure too high, Fan Full speed, compressor disabled.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of James Bowen
Sent: Monday, April 29, 2002 6:26 PM
To: vanagon@GERRY.VANAGON.COM
Subject: A/C Question

I've got issues with my A/C.  It works well, very cold when the
compressor is
on.  The problem I have is that just when the cabin starts to cool down,
the
damn high speed radiator fan kicks on and turns off the compressor.  The
fan
runs for a few minutes....just long enough for me to start sweating
again,
then it shuts off and the compressor turns on.  On, off, on, off ... you
get
the idea.

I've kept my eye on the temp gauge and the fan kicks on when the needle
is
just barely past the middle of the idiot light.  Hardly overheating, I'd
say.

Does anybody have any ideas how to correct this?

Sincerely, Melting in Austin.

TIA

Jim Bowen
'88 Wolfsburg