Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Problems after 1.9 head change
From:Kenneth Wilford
Date:Mon, 6 May 2002 12:28:48 -0400

How did you adjust your valves?  If you adjusted them per the Bentley Manual
(2 turns) this could be your problem.  Check your manifold pressure (vacuum)
and if it is low (should be around 12-14 at idle) then you could try backing
off your valve adjustment to zero lash to see if this helps.

Thanks,
Ken Wilford
John 3:16
http://www.vanagain.com
Phone: (856)-327-4936
Fax: (856)-327-2242

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Steve Sandlin
Sent: Monday, May 06, 2002 10:30 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Problems after 1.9 head change

I'm having some problems with my '84 automatic 1.9 since changing heads.
Ran fine on old heads but leaking, so bought new heads from Ron.  Since,
have had low power, rough idle, bad fuel mileage.  Saturday another problem
started.  When stopped at a stoplight, then trying to move from stop, engine
will not accelerate for 1-2 seconds.  Have not yet installed digitool to
check, but looking for some direction.  Ideas, anybody?
Thanks in advance,
Steve Sandlin
'84 Wolfsburg Westy
'79 Kombi
'00 New Beetle

_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx