

| Subject: | Re: Pop Top Rattle Solved--- |
| From: | Terry K. |
| Date: | Thu, 9 May 2002 10:41:43 -0500 |
Karl, Karl, Karl----- You are now required to sit in the back of the Bus--- I already resolved that problem-- I took off the stupid hard plastic rattle dampers on those stops, and added 1/4" black rubber crutch type ends on them---- No popsicle sticks----too much of a gypsy fix--- The holes on the latch were oval--allowing the top to bounce----and thus the latch rattling---- Did you eat the popsicle, prior to adding the sticks? Later, TK E-mail message From: wolzphoto@worldnet.att.net (Karl�Wolz) Date: Thu, May 9, 2002, 8:31am (CDT-2) To: CTONLINE@WEBTV.NET (Terry K.), vanagon@GERRY.VANAGON.COM Subject: Re: Pop Top Rattle Solved--- Terry, Terry, You just didn't look at the right end of the problem! My '85 started rattling at about 30K, so it wasn't really a wear situation. I simply glued two popsicle sticks, or actually one inch pieces of popsicle sticks to the spots on the sides of the upper bunk where the little steel feet from the top make contact. When the van comes from the factory, those feet have rubber shoes (like galoshes) that deaden the sound, but they wear out pretty quickly. Karl ----- Original Message ----- From: "Terry K." <CTONLINE@WEBTV.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Thursday, May 09, 2002 7:52 AM Subject: Pop Top Rattle Solved--- In a desperate attempt to stop the latch on the pop top from rattling upon hitting every road irregularity-I came up with this conclusion-----the holes in the male portion of the latch have been ovaled out, causing the top to not draw up tight to the roof, or I guess the luggage rack. I thought of adding some 1/4' rubber adhesive backed gasket type material, but this solution would be short lived, as the rubber would eventually squish down and the rattle would be back---- So here's what I did---- I removed the female portion of the latch, and welded the top portion of the hole closed--took my die grinder, and smoothed out the weld, and now the pin's of the latch catch the hole in a lower position, keeping the top pulled tighter to the roof--- Eureka!!!---No more rattling---- There is zero vertical adjustment for the latch --and as far as I could see this was the only way to resolve this irritating as all hell constant rattle---- Later, �������������������______________ ������������|[��]�[��]�[�]\ ������������|����|����|����| ������~~~�~||-(())----(())-| Terry-- ����������������"Zoom, Zoom, Zoom" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ http://community.webtv.net/CTONLINE/TerrysHighOnLife
Have something to add on this topic today? Revive this thread in the forum »