

| Subject: | Re: unique Westy floor covering? |
| From: | Chuck Mathis |
| Date: | Thu, 9 May 2002 14:08:32 EDT |
Pergo is a formica faced composite wood product that is generally printed to look like wood (they also do imitation tile and stone). I used some in a kitchen I remodeled and have contemplated using it in the middle of my '85 Wolfsburg Westy. Since it is a manufactured product it is not subject to the same expansion and contraction factors as wood but it does have some unique characteristics that may be problematic in a van. The manufacturer intends for this stuff to be full floating -- it just sits on a pad topping the subfloor and does not touch the surrounding walls or moldings. Not bad in kitchens since houses generally don't move too dramatically (except in California when the ground shakes or Florida in huricane season). Vehicles tend to move a lot and dramatically. Keeping the Pergo in one place and the glue joints intact would be a challenge. As far as sound deadening this stuff is not what you want. It is quite noisy when anything is dropped on it or when it is walked on. In the Westy, a lot of stuff (trim panels for the rear facing seat and kick panel for the rear seat) is screwed into the vinyl faced plywood that came from the factory and I'm not too sure about Pergo's screw holding abilities. I've come to like the funky polk-a-dot pattern of the factory vinyl so I think I'll keep it for as long as it lasts. Chuck '85 Wolfsburg Westy - 'Roland the Road Buffalo' In a message dated 5/9/02 11:14:37 AM, LISTSERV@GERRY.VANAGON.COM writes: << Date: Thu, 9 May 2002 11:48:59 EDT From: Jeff Sibley <Sibleyjm@AOL.COM> Subject: Re: unique Westy floor covering? In a message dated 5/8/02 11:36:29 PM Pacific Daylight Time, dave@SPARKPLUG.COM writes: > Who will be the first, to brag of "Hardwood floors" in their Westy? > > not sue what pergo is , but acoustically, wood is actually a good transmitter of sound and vibration, i would stick with rubber, cork, and synthetic sound dampners. use dynomat, q-pads, rubberized sealant, r-13 isulation, thick felt backing on your panels and you should have good results. wood in a car just seems like trouble waiting to occur. good luck, jeff >>
Have something to add on this topic today? Revive this thread in the forum »