

| Subject: | Re: Hypoid? EMERGENCY.... |
| From: | Mark Dorm |
| Date: | Fri, 10 May 2002 13:43:21 -0700 |
<html><div style='background-color:'><DIV> <P>Hey thanks so much for responding. I remember seeing this hex, and now I'm not afraid to open it. I do have the Bentley, and it was silent on this matter as were the archives, save a question from someone else that was never answered, until now. <BR></P></DIV> <DIV></DIV> <DIV></DIV>>From: "Birkenfeld Jeff" <BIRKENFELDJEFF@JOHNDEERE.COM> <DIV></DIV> <DIV></DIV>> <DIV></DIV>>Dude, you are looking for the large hex (16mm I think) headed bolt on side <DIV></DIV>>of differential. There is no drain, only a pan. You should see 2 pans <DIV></DIV>>under your drive train: 1 for the transmission and 1 for the differential. <DIV></DIV>>The trans pan has a dipstick tube out the driver side bottom, the diff pan <DIV></DIV>>does not. Fill tranny at the dipstick tube, fill diff on side after <DIV></DIV>>removing large hex bolt. You can fill the diff with hypoid oil until it <DIV></DIV>>runs out the side. To fill auto trans---when cold to dipstick bottom, drive <DIV></DIV>>it about 7 miles then check and add to top level. Check again next day <DIV></DIV>>after 7 mile drive. 7 miles=good warm up period. <DIV></DIV>>Prolly need to get a repair manual or the Bentley. <DIV></DIV>> <DIV></DIV>>Good luck, <DIV></DIV>>JB <DIV></DIV>> <DIV></DIV>> <DIV></DIV>> >Bentley, on page 39.50 says to use Hypoid oil SAE 90, Mil-L2105 B for the <DIV></DIV>>Final drive lubricant and that the capacity is 1.25 liter (1.3 US qt) [were <DIV></DIV>>talking differential-automatic]. <DIV></DIV> <DIV></DIV>> <DIV> </DIV> <DIV></DIV>> <DIV>But hey stupid me doesn't know were to fill it.... to top off the slow </DIV>>leak I'm having. Before I start turning bolts I don't understand, can <DIV></DIV>>somebody comment? There is NOTHING in the archives. I searched under Fill <DIV></DIV>>Differential <DIV></DIV>> <DIV></DIV></div><br clear=all><hr>MSN Photos is the easiest way to share and print your photos: <a href='http://g.msn.com/1HM105401/46'>Click Here</a><br></html>
Have something to add on this topic today? Revive this thread in the forum »