Good idea Marshall---

CLR will work good----

What will work faster---but you have to be real careful with it--is a
light wipedown in   diluted muriatic---

It'll make the rust stains go---POOF !!!!

It won't even bother the fiberglass either---just you---- :>)

Don't put anythng on the sensor----just loosen up the old one---crank it
almost all the way out----having the new one real close----pop out the
old----put in the new  fast--no loss of coolant---done

Later,

Terry

  Subject: removing rust on poptop from corroded rubber seal...

Hi Volks:

1. � My new poptop seal has arrived from BusDepot - yahoo! - and now
I've got to remove the rust on the fibreglass left from the old seal.

I was planning on using CLR and a rag.
Do you guys know of a better way to do it?

2. � My new TempII sensor has arrived.
I was going to just R and R the old one. Should I use some sort of
sealing compound or new gasket etc? (I've never done one of these
before.)

Thanks,
Marshall Ruskin
84 Westy
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com). Version:
6.0.361 / Virus Database: 199 - Release Date: 5/8/2002