Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Oil Capacity, Tiico Conversion
From:Matthew Pollard
Date:Wed, 22 May 2002 12:28:37 -0700

Derek, what does the installtion manual say? it says 4.5L API oil. That
is about 4.73 quarts. DO NOT TRUST THE HASH MARKS ON THE DIPSTICK. btdt!
If i just put in oil till the hash marks are 'wet' i'd have about 1.75
quarts of oil in my rig.... From Peter B (and Kyle from Volkscafe): Add
4 quarts, cycle the oil (as in run the engine). Then mark that as your
low point on the stick. Now add another quart & again cycle the oil. Now
mark that as your high point.  In the ideal world that would be the top
and bottom of the dipstick, but in my case (and a few others) it ain't
the case.

matthew
86 syncro westy tiico

Derek Krueger wrote:
>
> Okay, I have received a few different numbers relating to the oil capacity
> of the Tiico conversion for the Vanagon.  I have heard everything from 4
> quarts (3.78541 liters) to 5 quarts (4.73176 liters).  Five sounds like too
> much, four too little.  So, what is the correct amount?  Add four and then
> add slowly until top of stick is reached?
>
> I called tii and have not heard back.
>
> Thanks,
> Derek