Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: What needs to be replaced in a front suspension rebuild?
From:Stan Wilder
Date:Mon, 27 May 2002 20:39:36 -0500

2 each upper ball joint #22( 251 407 361)
2 each lower ball joint #20 ( 251 407 187)
2 each strut rod bushings damping ring, rear # 16 (251 407 179)
2 each strut rod bushing damping ring, front #12 (251 407 175)
2 each sway bar inner bushings #3 22mm, .085 diam diameter ( 251 411 041
A)
2 each sway bar outer bushings #5 23mm (251 411 045 A)
2 each tie rod ends #7 ( 251 419 811)
4 each stabilizer link bushings, set for 2 ends #4 ( 411 513 121)
2 each front brake line ( 251.611.775a)
2 spacer, strut rod #9 ( 251.407.097)
2 Lower Control Arm Inner, Lower # 17( 251 407 183)
4 Upper Control Arm Bushings #4 (251 407 077)

On Mon, 27 May 2002 18:22:11 -0700 Joe Tu <joetu@PACBELL.NET> writes:
> Minus the shocks, and control arms, what needs to be replaced? How
> many
> bushings, ball joints, etc. and how much should it cost parts wise
> and how
> long should it take time wise? This is for a 90 passenger vanagon.
>
> Joe
>

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.