Marshal;
        I would check for twelve volts on the harness plug to the AFM
with the ignition on. Chec for a good ground also.

Good Luck and Drive Safely
Ken Lewis
86 Crewcab,60 356
http://Neksiwel.20m.com/
On Mon, 27 May 2002 18:59:33 -0500 Marshall <mjruskin@SHAW.CA> writes:
> Hi Volks:
>
> My engine won't run for but a few seconds and roughly at that.
>
> Using the digitool, I see that the AFM is not producing a control
> voltage. No change in the AFM voltage output as I vary the
> throttle.

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.