

| Subject: | Re: Rich mixture/excessive fuel use |
| Date: | Thu, 6 Jun 2002 10:58:05 -0500 |
On Thu, 6 Jun 2002, David Beierl wrote: > At 11:19 AM 6/6/2002, joe@cedar.net wrote: > >I am getting about 10-12 MPG on the Hwy with my '83 1.9L > >watercooled FI Vanagon, less in town. The exhaust smells > >extremely rich. > > Typical behavior if O2 sensor bad or shorted. Unplug it, measure voltage > on harness side -- should be near 0.5v. If not, shield probably shorted to > internal wire at connector or in harness somewhere. If ok, run without > sensor for a bit Replaced the O2 sensor. > >Engine runs OK. Timing seems to be correct, > >though I have no notch on my pulleys and used a ^ shaped mark on > >the flywheel and centered it in the timing hole. Will look more, so I should not vbe using the flywheel at all for setting timing? > I have serious doubts about this. The pulleys come from the factory with > the vee-notch and circular notch on them. Even a replacement pulley has > the TDC circular notch. Dennis Haynes undoubtedly knows whether there is > any timing info on the flywheel other than the little magnet that triggers > the VW sender -- but I've never heard of there being any. > > david > > -- > David Beierl - Providence, RI > http://pws.prserv.net/synergy/Vanagon/ > '84 Westy "Dutiful Passage" > '85 GL "Poor Relation" > >
Have something to add on this topic today? Revive this thread in the forum »