

| Subject: | Re: 87 Syncro axle help needed |
| From: | Adrian Bertarelli |
| Date: | Thu, 6 Jun 2002 19:13:52 -0600 |
Thank you for all your advice I guess the trick is to clean those suckers really good. I cleaned them with degreaser picked the grease out and blew it clean with the air nozzle thing and sprayed some bp liquid wrench stuff on and let it soak over night. Came off like butter. Thank you for your help I am the kind of person to just barrel in their and get to work, this just needed some patience. Thanks To All Adrian -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Stan Wilder Sent: Tuesday, June 04, 2002 5:42 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: 87 Syncro axle help needed The twelve point socket heads are called Tri-Square and Its best to go buy the driver if you haven't got one. I use a thin bladed screwdriver to pick out the grease, dirt combination then with the Tri-Square driver in a 1/2" or13mm deep socket on an extension I whack the extension holding the driver/socket combination with a hammer. It normally is enough to break the seize on the bolt and it comes out OK after that. Hope this works so you don't have to drill the heads off. Stan Wilder On Wed, 5 Jun 2002 17:10:05 -0600 Adrian <adrian.bertarelli@ATTBI.COM> writes: > To all, > I am looking for a little advice on this. I have an 87 > syncro and I removed the tranny for repairs. At the same time I > decided > since I have it out I should take the axles out and re-boot them. > The > issue is that I can not get the bolts of that attach the rear axle > to > the wheel. They are in that protective housing. It looks like they > are > 6mm allen heads or that 12 piont 6mm torx bit. I can get the imact > wrench on it but they are in so tight I am going to strip them > trying to > get them out. Is there a trick I am missing. I could say screw it > the > boots are not in bad shape the ones on the tranny side are but I can > get > to those. Is their an easier way or do you have to use shear brute > force to get them out. > Any advice will be appreciated. > Thanks > ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/.
Have something to add on this topic today? Revive this thread in the forum »