The tapered rubber on the inside circumference always go towards the
lubrication, also there is normally a spring inside the seal that tells
you the inner side.
As far loosing brake fluid, I'd suggest the you fully purge the system,
that means removing the brake reservoir and cleaning all that crud out,
bleeding the clutch slave from the bottom and top bleeder, bleed the
front calipers from both the bottom and top.
Its only about a $3.00 quart of fluid to change all of the fluid.

Stan Wilder
83 Air Cooled Westfalia

On Sat, 8 Jun 2002 22:31:27 -0700 Todd Last <Rubatoguy@MINDSPRING.COM>
writes:
> Which direction do the grease seals on the front rotors go?
> Flat-side facing out?
> Flat side facing in?
>
> thanks
>
> Todd
> '88 Westy
>

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.