Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:FIX]auto tranny experts HELP! UPdate
From:Dan Noll
Date:Tue, 11 Jun 2002 21:22:58 EDT

The used tranny has the dipstick coming form the case not the pan... Seller
claimed that it came from vanagon and had already sold the transaxel, need to
determine if it will work before I spend money to rebuild for install.
OK the number for the tranny I have is a 010-321-105... the database says it
is superseeded by 010 321 101 G. I am sure it is out of the lighter vehivles
made before 85.  I also understand that late modle 85 and 86-87 used the 087
321 101 B transmission.

My question is... if I put this in my vanagon and use all the hardware off
the existion taanny, will it match up and work ?  Am I carzy to do this?
Thanks
Dan...
86 GL
Now a 2 speed auto
-----------------
Forwarded Message:
Subj:   [FIX]auto tranny experts HELP!(little long)
Date:   6/8/02 10:59:33 AM Pacific Daylight Time
From:   <A HREF="mailto:DANJNOLL@AOL.COM">DANJNOLL@AOL.COM</A>
To: <A HREF="mailto:vanagon@GERRY.VANAGON.COM">vanagon@GERRY.VANAGON.COM</A>
Sent from the Internet (Details)

I need some help. I have lost seconed gear in my transmission.
It will only shift directly from first to third.
If I put lever in 2nd it doesn't engauge the engine just revs.
When on the road and I kick it down, won't go to 2nd just revs.

This all started when I tried to fix my 2nd gear brake leak.
(I posted before and got no response)I destroyed the piston, bought a used
transmision and used that piston as a temp fix.

To keep short Following  Q's.

Would adjsuting the 2nd gear brake do any good or is it shot?
Would changing the valve under the throttle body help?
What is resaonable cost to rebuild trany already out of van?
The used tranny has the dipstick coming form the case not the pan... Seller
claimed that it came from vanagon and had already sold the transaxel, need to
determine if it will work before I spend money to rebuild for install. I have
the numbers can provide if it will help.
Thanks
Dan
86 GL

Have something to add on this topic today? Revive this thread in the forum »