Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Easier way to fix worn tracks in AFM - Method 2
From:David Beierl
Date:Mon, 17 Jun 2002 11:36:25 -0400
At 07:24 AM 6/17/2002, Marshall wrote:
>IMHO, A properly sized new phillips screwdriver - of good quality .
>A good quality SD is hard and sharp.

Also great care and powerful pressure of the driver into the screw -- those
screws are Loctited (or similar) in to the housing.  Heating the screw with
a big soldering gun would probably help too -- but I wouldn't put a flame
near that ceramic resistor plate.

david

--
David Beierl - Providence, RI
  http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"