Anyone know of a source for the circuit boards themselves??
Chuck
'83 Westy
-----Original Message-----
From: Marshall <mjruskin@SHAW.CA>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Monday, June 17, 2002 12:31 AM
Subject: Easier way to fix worn tracks in AFM - Method 2

Hi Volks:

The most common way to remedy a worn-out AFM, is to remove the circuit board
containing the resistive track - and slightly "slot" the screw holes.

This allows the circuit board to be repositioned slightly when put back in -
thus allowing the wiper to sit on fresh resistive surface.

Today, I thought of a much easier way to accomplish the same goal.

Remove the screws holding the circuit board down - and we will "operate" on
those, instead of the circuit board.

Our goal here is to make a portion of the screw's "thread shaft" narrower -
instead of making the circuit board holes larger. Then when we put the
screws back in, there is some play in the position of the board - which is
exactly what we want.

So, get the dremel, or a small file, and operate on the area of the screw
shaft, to a distance down from the screw head,  about the thickness of the
circuit board. Don't go too far, or the screws won't have threads to screw
in.

I guess in case you mess up, it'd be handy to have some replacement screws
around.

Messing up screws sure beats messing up the circuit board - who's got spares
of THAT?

Now, I called this procedure "Method 2". While I was writing it - I thought
of "Method 3" - which is even easier than Method 2.

Any guesses how it would work?

Marshall Ruskin
84 Westy

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.370 / Virus Database: 205 - Release Date: 5/11/2002