Have you tried just 'jumpering' the fuel pump on?

David Marshall

Fast Forward Automotive Inc.
4356 Quesnel Hixon Road
Quesnel BC Canada  V2J 6Z3

http://www.fastforward.ca    mailto:sales@fastforward.ca
Phone: (250) 992 7775        FAX: (250) 992 1160

- Vanagon Accessories and Engine Conversions
- Vanagon, Transporter and Iltis Sales and Importation
- European Lighting for most Volkswagen models

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Michael S. Nichols
Sent: June 19, 2002 6:51 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Coil terminal "+ and -" leads switched by mistake!

Hello from Atlanta, Ga.  I am a Vanagon sinner---I mistakenly switched the
three leads on my coil on one of our '81's, tried to start the van, and no
go, of course.  I caught my mistake, switched them back and no go.  I then
swapped my ECU, double relay, air box from my miswired van into my running
van and they worked fine. Coil appears to fire ok.  I have no power at the
fuel pump in the non running van.  No fuses blown in the fuse block.  I
replaced points and condenser in sick van....
Questions:  Is there some form of fusible link wire that burned out?  Is
there an in line fuse?  Did I fry the FI harness?  Any ideas?  Thanks!

Regards,

Mike Nichols
2--'81's