In a message dated 6/19/2002 5:53:00 PM Eastern Daylight Time, 
LISTSERV@GERRY.VANAGON.COM writes:

> Does anyone have one of these running boards and do you really have to
> remove them to use the jack?
> 
       Absolutely !  It mounts in the jack holes.  I just put one of these on 
for a customer and it did not install as easily as it indicated on the 
instruction sheet.  Had to cut and grind the front bracket to get it to fit 
properly.  The template for drilling the holes were off by 1/4 ".  
So........beware !  Check everything twice before drilling, cutting, etc.  To 
remove after proper installation you will need to remove the two set screws 
with the Allen wrench.  So......keep the Allen wrench with your onboard tools 
or you won't be able to remove the step and access the jack holes.

Cheers��

Frank Condelli
Almonte, Ontario, Canada
<A HREF="http://members.aol.com/BusFusion/bfhome.htm">BusFusion</A> a VW Camper camping event, Almonte, ON, May 30, 31, June 1, 2, 2002
'87 Westy & Lionel Trains
Member: <A HREF="http://www.vanagon.com/">Vanagon List</A>, <A HREF="http://www.bcn.net/~limbo/">LiMBO</A>, <A HREF="http://www.westfalia.qc.ca/CIW_English.asp">IWCCC</A> & Capital City VW Club 
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
<A HREF="http://members.aol.com/Fkc43/stebro.htm">STEBRO/Vanagon Stainless Steel Mufflers</A> �
<A HREF="http://members.aol.com/Fkc43/busindex.html">Frank Condelli & Associates</A> or http://frankcondelli.com