Early Westy models had the external pump mounted under the sink. These
models had a separate inline fuse holder adjacent to the pump. It is a
black tube with wire coming out of each end.

Mark

Steve Selin wrote:
>
> Hello,
>
> My sink pump works and the switch at the faucet works BUT the pump does no
> go on when the switch is activated.
>
> All fuses look good.  I checked, and there is no juice getting to the pump.
> Looking at the fuses by the driver door pillar there are 2 that are separate
> from the rest.  All fuses look good.
>
> I looked under the driver seat and found a fuse (16) that is good.  There is
> another wire in there that gets 2-3 volts when the key is in the ON
> position.
>
> Any idea where the juice is for my pump?
>
> Thanks,
> Steve
>
> _*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_
>
> Steven Selin      -        s.j.selin@vt.edu