

| Subject: | Re: Low-Level Coolant Blinker |
| From: | Maynard Southard |
| Date: | Mon, 24 Jun 2002 09:13:07 -0400 |
Thanks to all who responded so quickly to my Blinking LED questions. Appears that I had a bad ground connection on the brown wire to the sensor. All is fine now and the engine is running nicely. Maynard On Sunday, June 23, 2002 10:09 PM, Maynard Southard [SMTP:echomhs@gis.net] wrote: > Ok, I just replaced the head gasket in my '86 Diesel Double Cab. Now the Low- > Level Coolant Indicator is blinking away. It did not do this before the head > gasket replacement. The reservoir and level indicator are fairly new (3 > months). I flushed all the old coolant out (it looked fine - no sediment or > rust). I chose NOT to use the VW blue coolant (I'm using regular Prestone). > I've bled all the air from the system. Reservoir is full to the cap. The > temperature gauge reads as it always has (just to the right of the blinker). > The radiator fan comes on every once in a while, as usual. Everything seems > fine, except that dang blinking LED! > > If I bypass the sensor, should the LED stop blinking? What else could be > causing blinking? Any suggestions for what else to check? > > Thanks, > > Maynard Southard (OvO) '79 > '86 Double Cab Diesel "Col. Potter" > '82 Westy Diesel "Reinhardt" > '82 Vanagon GL Diesel "Sluggo" > '93 EV GL "Klinger" > '00 Golf GLS TDI "WooHoo" > '84 Jetta GL TD "Donor"
Have something to add on this topic today? Revive this thread in the forum »