At 08:04 AM 7/3/2002, Jon Durham wrote:
>The diode indicators for the water level, voltage, etc located on the
>appliance module cease to function.

Make sure panel switch is on... <g> See if water pump works -- if not you
probably have lost +12v on that circuit.  Check fuse...

If pump works, you have +12 right to the panel plug.  Has panel come
unplugged?  Pull it and see.  It's not static-sensitive, you can handle it
freely.  Check that it has ground.

It's not likely to lose both sides of the panel at once, so probably the
difficulty is elsewhere -- unless the switch fails.  Jumper across it to test.

david

>Can someone walk me through the steps to diagnose?
>
>Jon A Durham
>256-722-8692

--
David Beierl - Providence, RI
  http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"