Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Fender Flares for Syncro 16 - Anyone got Part numbers?
From:80 Westy Pokey
Date:Thu, 4 Jul 2002 10:04:20 -0400

I was wondering if syncro 16 fender flares fit non-syncros 
(assuming you trim the rear wheel opening as David described)
or does the fuel filler get in the way? It LOOKS like it 
would be ok at:

http://www.vanagon.com/media/syncro/img/syncro_transporter_gre
en.jpg

ANYONE HAVE THE PART NUMBER FOR THESE?

Thanks,
Chris

----- Original message ----
>>Date: Fri, 28 Jun 2002 09:59:41 -0700
>>From: "David Marshall" <vanagon@volkswagen.org>  
>>Subject: RE: tri-star fender flares------looking for 
>pictures of these 
>on ������������Vana �������������gons.....anybody seen 
>these?  
>>To: <pokey@vanagon.org>
>>Cc: <vanagon@GERRY.VANAGON.COM>
>>
>>Now that I have installed a few sets, the word 'extensive' 
>should not be
>>there.  It should be minor, you just need to trim a little 
>from the rear of
>>the rear wheel openings.  I'll have pictures soon on the 
web 
>site.
>>
>>David Marshall
>>
>>Fast Forward Automotive Inc.
>>4356 Quesnel Hixon Road
>>Quesnel BC Canada  V2J 6Z3
>>
>>http://www.fastforward.ca    mailto:sales@fastforward.ca
>>Phone: (250) 992 7775        FAX: (250) 992 1160
>>
>>- Vanagon Accessories and Engine Conversions
>>- Vanagon, Transporter and Iltis Sales and Importation
>>- European Lighting for most Volkswagen models
>>
>>-----Original Message-----
>>From: 80 Westy Pokey [mailto:pokey@vanagon.org]
>>Sent: June 27, 2002 3:59 AM
>>To: David Marshall
>>Cc: vanagon@GERRY.VANAGON.COM
>>Subject: Re: tri-star fender flares------looking for 
>pictures of these
>>on Vana gons.....anybody seen these?
>>
>>
>>David I am confused. Your website:
>>
>>http://www.fastforward.ca/vanagon/default.htm#arches
>>
>>says "Please note that the Syncro 16 wheel arches require
>>extensive modification of the fender openings on a non-
>>Syncro 16 models."
>>
>>So wouldn't the Tri-Star Arches fit easier - ie:
>>no "extensive modification" of the fender opening? What is
>>the minor trimming? Do these come with instructions?
>>
>>Thanks,
>>Chris
>>
>>---- Original message ----
>>>Date: Wed, 26 Jun 2002 23:38:00 -0700
>>>From: David Marshall <vanagon@VOLKSWAGEN.ORG>
>>>Subject: Re: tri-star fender flares------looking for
>>pictures of these on Vana �������������gons.....anybody seen
>>these?
>>>To: vanagon@GERRY.VANAGON.COM
>>>
>>>I recommend the Syncro 16 wheel arches over the Tri-Star -
>>they just fit
>>>better if you are running larger tires.  The Tri-Star
>>arches will actually
>>>make your openings smaller.  Minor trimming in the rear is
>>required for the
>>>Syncro 16 arches.  I sell these for $500 USD for the set.
>>They are not
>>>cheap, but they are very nice!
>>>
>>>David Marshall
>>>
>>>Fast Forward Automotive Inc.
>>>4356 Quesnel Hixon Road
>>>Quesnel BC Canada  V2J 6Z3
>>>
>>>http://www.fastforward.ca    mailto:sales@fastforward.ca
>>>Phone: (250) 992 7775        FAX: (250) 992 1160
>>>
>>>- Vanagon Accessories and Engine Conversions
>>>- Vanagon, Transporter and Iltis Sales and Importation
>>>- European Lighting for most Volkswagen models
>>>
>>>-----Original Message-----
>>>From: Vanagon Mailing List
>>[mailto:vanagon@gerry.vanagon.com]On Behalf
>>>Of Smola, Tony
>>>Sent: June 26, 2002 4:06 PM
>>>To: vanagon@GERRY.VANAGON.COM
>>>Subject: tri-star fender flares------looking for pictures
>>of these on
>>>Vana gons.....anybody seen these?
>>>
>>>
>>>Hello fellow Vanagonites,
>>>
>>>I am looking for pictures of the cool fender flares...the
>>tri-star
>>>type......I have the SVX motor going into my 85' Westy,
>>>and I was able to utilize the factory 16 X 7.5 jj alloys
>>from the
>>>SVX.....the wheel height is the same as the MXT's
>>>which I will be selling......there is less than 5K on the
>>tires......
>>>Anyway I wanted to see some photos of Vanagons with the
>>cool wheel
>>>flares............the SVX wheels have a 55 mm offset, but
>>with
>>>the adaptors they fit perfectly under the wheel
>>arches........And I just had
>>>to take the front wheels to my vertical mill to open the
>>center hub area and
>>>created a new lip for the stock center caps........looks
>>totally
>>>original........
>>
>>
>>

Have something to add on this topic today? Revive this thread in the forum »