I don't know how the relay positions are labeled, or where but the only
relays on the back of the fuse block are one to the far left, labeled 21,
that's a three pin.  And two to the far right, both 5 pin, and one about
twice the size of the replacement relay, the other two and a half times as
large.

Don't see any others on the back of the fuse block but the position two
places to the right of the far left is partially melted so the relay might
have been relocated.

Mike

> From: David Beierl <dbeierl@attglobal.net>
> Date: Sat, 06 Jul 2002 20:17:18 -0400
> To: mike <mwmiller@cwnet.com>
> Cc: <vanagon@gerry.vanagon.com>
> Subject: Re: X relay
>
> At 06:28 PM 7/6/2002, mike wrote:
>> Well, there's no relay behind 3.  The relay that the local foreign parts
>> dealer is a 4 pin relay and there's only a three pin relay behind 1-2 but it
>> doesn't look like any thing attaches to 3.  There are a couple of larger 5
>> pin relays at the other end of the fuse block but these don't affect the
>> wipers working with the key off.
>>
>> Any nifty ideas of where to look out there?
>
> I think you're looking at fuse position three?  If so, don't -- it's relay
> position three.  There should be something in the first slot, then an
> empty, then the load-reduction relay that you want.  It should have four
> pins and probably is stamped 25.
>
> david
>
>
> --
> David Beierl - Providence, RI
> http://pws.prserv.net/synergy/Vanagon/
> '84 Westy "Dutiful Passage"
> '85 GL "Poor Relation"
>